Navigate to the www.rockhard4x4.com homepage

QUESTIONS? CALL US!

844-762-5427

Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032]
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 1 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 2 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 3 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 1 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 2 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 3 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 4 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 1 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 2 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 3 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 4 of 0
Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032] - Image 5 of 0

Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Wrangler JK 2/4DR 2007 - 2018 D30 or D44 [RH-9032]

RH4X4MADEINUSA
5 Reviews
$249.95
RH4X4 FEATURES:
  • 1/4" Thick Steel
  • 100% Bolt on Install
  • Fits All Control Arm Joints
  • Black Powder Coat Finish
  • 100% Made in USA
  • Lifetime Warranty
  • FINISH: Black Powder Coat
  • California Residents: WARNING
  • .: Please click here for your Propsition 65 warning.
Part Number: RH-9032

RH4X4 Product Info

Rock Hard 4x4 is very proud to offer the Heaviest Duty 1/4" Thick Control Arm Skid Plates for the Jeep D30/D44.

100% bolt-on skid plates for your vulnerable front and rear lower control arm mounts. The OEM Dana 30 and 44 control arm mounts aren't braced or skid plated and are the lowest points on your rig. First to hit, first to break!

Total Weight: 10 lbs.

Our 1/4" thick skid plates are made from a solid sheet of steel then bent, formed, and hand welded into it's highly protective shape. Notched for zerk grease fittings found on common control arm joint upgrades.

Strength
Our skid plate system is the industry standard because of the confidence it instills in each and every customer. Each control arm skid is laser cut from 1/4" thick steel coated in our weather and debris resistant powder coat finish. Strength is proven on virtually all Jeep enthusiast forums with glowing reviews. Since 2007 our skid plate system has been the undisputed leader in undercarriage protection.

What comes in every kit:
  • Driver and Passenger Side Skid Plates
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • Installs in minutes
  • 1/4" thick plate steel
  • Unmatched quality and fitment

FRONT NOTE: Not compatible with alignment cam bolts.




FAQ:
Why not weld on skid plates?
Unless you have hours to kill, not to mention a welder, go for it. We've found however that even weld-on versions aren't 1/4" thick steel.

Will these spin off during a hard impact?

No. Built in retention bends prevent the skid plate from rotating backwards.

Is any welding required?
No. Our mounting method allows for a DIY no-weld, truly bolt-in install.

What finish is available?
Rock Hard 4x4 skid plates ship powder coated black with a semi-smooth, semi-gloss finish.

Where is this mount made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!



RH4x4 Installation Manual/Video

Please click the image to download.

RH4X4 Warranty Info

Product: Lifetime
Coating (if applicable): Due to varying climates and individual use, we cannot offer a warranty on powdercoating.

Reviews

Average Customer Review:
( 5 )
Brian Gallop from Zirconia, NC United States
January 18, 2024
Bolt on lower control arm skids
Glad to have them eazy to install and very functional. My jeep looks so much better with the on.
Was this review helpful to you?
Robert Miller from Highland, CA United States
September 8, 2019
Was this review helpful to you?
Richard Anderson from Encinitas, CA United States
July 1, 2018
Front & Rear Lower Control Arm Skids
Fit perfectly - easy install
Was this review helpful to you?
Distant Cousin from TEXAS
March 1, 2018
Front and Rear Lower Control Arm Skid Plates
Easy to install on stock 2017 JKU. You may need a breaker bar to get those factory bolts to unscrew, they were mighty tight. About 20 minutes per unit. I used one additional large thick washer, as a gap filler, to tighten the fit on each rear unit. Work safe and play safe.
Was this review helpful to you?
Anonymous Person from peoria, AZ United States
December 10, 2017
very pleasedvery good product and fast shipping. ++++
Was this review helpful to you?

JOIN OUR E-NEWSLETTER FOR THE LATEST UPDATES