Rock Hard 4x4™ Patriot Series Tube Slider Rocker Guards Angled Downward for Jeep Wrangler JK 4DR 2007 - 2018 [RH-6011]

Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Wrangler JK 4DR.

1.5" LOWER STEP THAN OUR ANGLED UP VERSION.

The RH4x4 Jeep JK 4DR Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!

Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.

Functional Design
These bolt on just like your Rubicon sliders but give you much more capability both on and off the trail. Each mounting bar is 2" x 3" .120 thick steel making them indestructible rock crushers. We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.

Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside.

Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.

Components
RH4x4 Rocker Guards are very recognizable for two major reasons: owners bragging about the trail they just conquered and how strong they look. What goes into a RH4x4 Rocker Guard set is what makes them so strong.

Heavy duty tube slider protects your body panels. Angled upward tube sliders shown.


Count on our tubular slider to not only protect your body - but give you a great 3.5" step! Angled upward tube sliders shown.


Extremely heavy duty construction over factory mounts. This is why we do not simply bolt "over" the factory rails - we completely replace them! Angled upward tube sliders shown.


3 body mounts are used - not 2 like import versions of our American made slider. Angled upward tube sliders shown.


Tapered to follow body lines plus give clearance for up to 38" tires without modification. Angled upward tube sliders shown.




What comes in every kit:

• Driver and Passenger side Tubular Rocker Guards
• Hardware
• Installation Instructions

Three Reasons Why:

• Ease of installation
• Thickness and strength
• Unmatched quality and fitment

---

FAQ:
Is any welding required?
No. Our Rocker Guards are a bolt-on install.

Commonly asked dimensions:
Door outwards to top of rail: 3.5" (step out distance)
Distance from bottom of door cutout to top of rail: 4" (step down distance)
Distance from rectangular rail to top of tube: 0.5" (distance rail sticks down from top of rail)

Body lift compatible?
No.

Why don't we simply mount "around" my OEM Rubicon rails?
To mount around your Rubicon rails we'd have to eliminate our welded in studs along the sides of our rails. This would greatly lessen their mounting strength and ability to distribute load along the rail. We choose to replace your Rubicon rail completely so we can mount in more places along your Jeep's body.

Longer bolt size:
12mm x 1.75 (1-3/4") x 120mm

Is any trimming required to the OEM fenders prior to Tubular Rocker Guard installation?
No. You do not have to trim your OEM fenders at all for clearance. Some other competing sliders require trimming up to 5/8" of an inch off your plastic fenders.

What finish is available?
RH4x4 Rocker Guards ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this Rocker Guard set made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

---

Please click the image to download.

Product: Lifetime
Coating (if applicable): Due to varying climates and individual use, we cannot offer a warranty on powdercoating.