Navigate to the www.rockhard4x4.com homepage

QUESTIONS? CALL US!

844-762-5427

You are here:Home > SHOP BY RIG > Jeep
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000]
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 1 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 2 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 3 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 1 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 2 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 3 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 1 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 2 of 0
Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000] - Image 3 of 0

Rock Hard 4x4™ Steering Stabilizer / Tie Rod Clamp for 1-3/8" OD Tie Rods [RH-9000]

RH4X4MADEINUSA
3 Reviews
$74.95
RH4X4 FEATURES:
  • Rounded Skid Surface
  • Black Powder Coat Finish
  • 100% Bolt on Install
  • All Hardware Included
  • 100% Made in USA
  • Lifetime Warranty
  • FINISH: Black Powder Coat
  • California Residents: WARNING
  • .: Please click here for your Propsition 65 warning.
Part Number: RH-9000

RH4X4 Product Info

Fits Tie Rods with out Outer Diameter of 1-3/8"

**2023 UPDATE** NOW COMPATIBLE with Teraflex Falcon Nexus EF 2.2 Fast Adjust Steering Stabilizer. If you have this steering stabilizer please note it when ordering so we can send you the updated version of this Tie Rod Clamp.


Replace your embarrassingly weak and vulnerable factory steering stabilizer/tie rod clamp with our heavy duty CNC machined clamp.

Our clamp uses the same locking collar and camp theory as our world famous Sports Cage systems. Once secured to your tie rod our clamp will give you a lifetime of use. It's guaranteed to last longer than your tie rod!

NOTE: Not designed for factory steering stabilizer. This is designed for an aftermarket steering stabilizer with a 1/2" ID sleeve. The included grade-8 bolt is too large for factory steering stabilizer sleeve. You can press out that sleeve however and press in a 1/2" ID sleeve to use our clamp.

Deflecting Design
Unlike your factory clamp that acts like a rock catcher, our rounded clamp allows you to skid and slide over the obstacle. This prevents bent tie rods and worn ball joints. You are actually increasing the lifespan of your steering components with this simple upgrade.

The factory tie rod clamp is made from a thin plate that actually protrudes down past your tie rod. This allows it to catch on rocks and other trial debris. Hit hard enough or enough times and it will rotate out of position. This causes strain on your tie rod and steering stabilizer. Not to mention it's held in place by thin u-bolts that once bent after the mounting plate twists cannot be reused.


Strength
CNC machined from 1020 DOM (drawn over mandrel) means unstoppable strength. You aren't going to break this tie rod clamp

Ease of Installation
Simply unbolt your factory tie rod clamp, install ours in same location, tighten hardware, high-five your buddies.


What comes in every kit:
  • Tie Rod / Steering Stabilizer Clamp
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • Deflecting design
  • 1020 DOM Steel strength
  • Installs in minutes




FAQ:
What tie-rods fit our design?
Virtually all aftermarket tie rods are compatible including the OEM factory tie rod. Our tie rod clamp fits tie rods with an outer diameter (ID) of 1-3/8".

How secure is the RH4x4 locking collar?
If we didn't believe 100% in our collar design we wouldn't run it in our own rigs. It's proven design provides an unbreakable joint and you can feel confident it will keep you and your passengers safe for a lifetime of trail use.

Is any welding required?
No. Our locking collars allow for a DIY no-weld, truly bolt-in install.

What finish is available?
RH4x4 steering stabilizer / tie rod clamps ship powdercoated black with a semi-smooth, semi-gloss finish.

Where is this mount made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powdercoated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

RH4X4 Warranty Info

Product: Lifetime
Coating (if applicable): Due to varying climates and individual use, we cannot offer a warranty on powdercoating.

Reviews

Average Customer Review:
( 3 )
Kevin Whiteley from Alta Loma , CA United States
August 28, 2017
Looks Awesome
Much better than the old bracket I had and no sharp corners to catch on things.
Was this review helpful to you?
Anonymous Person from CO United States
February 27, 2017
Very fast shipping. Great company to work with.
Very fast shipping. Great company to work with.
Was this review helpful to you?
RIchard KIng from Lawrenceville, GA United States
April 2, 2016
2007 Jeep Wrangler
Product fits my Rock Krawler lift kit. Thank you!
Was this review helpful to you?

JOIN OUR E-NEWSLETTER FOR THE LATEST UPDATES