You are here: Home > SHOP BY RIG > Ford Bronco
Choose a sub category:
Ford Bronco (2021 - Current) Coming Soon Ford Bronco (1966 - 1977)
Sort By:
Page of 1
Rock Hard 4x4™ Shorty Winch Guard with Light Mounting Tabs for RH-6200 Front Bumper [RH-6201] Rock Hard 4x4™ Shorty Winch Guard with Light Mounting Tabs for RH-6200 Front Bumper [RH-6201]

100% bolt on upgrade for the RH-6200 front bumper. Uses front bumper hardware to mount.

Light Mounts
Pre-welded light mounting tabs are spaced apart to accommodate 10" LED bars or individual light pods.

10" LED Bar recommendation: KC-334

http://www.rockhard4x4.com/product_p/kc-334.htm


Individual Light Pod Recommendation: KC-332
http://www.rockhard4x4.com/product_p/kc-332.htm



What comes in every kit:

  • Winch Guard Hoop
  • PreWelded Light Mounting Tabs

Three Reasons Why:
  • 1/4" thick plate steel
  • Winch ready
  • Simple install



FAQ:
What finish is available?
RH4x4 front bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

RH4X4 PRICE: $99.95
Rock Hard 4x4™ Stinger Hoop for RH-6200 Front Bumper [RH-6202] Rock Hard 4x4™ Stinger Hoop for RH-6200 Front Bumper [RH-6202]

Stinger Hoop upgrade for the RH-6200 front bumper. Uses top bumper mounting hardware plus additional 4 holes in front (drilling required).

Functional Stinger Design
So many stinger designs, but only 1 that actually works. The popular teardrop look of pointed stingers does little to prevent a rollover, they simply push the Jeep over on it's side. Our flat-nose design actually acts as a break and increases the chances of stopping a rollover.

What comes in every kit:

  • Stinger Hoop
  • Hardware

Three Reasons Why:
  • Functional Design
  • 1/4" Thick Plate Steel Gussets
  • Simple install



FAQ:
What finish is available?
Ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

RH4X4 PRICE: $149.95
Rock Hard 4x4™ Patriot Series Rear Bumper for Ford Bronco 1966 - 1977 [RH-6100] Rock Hard 4x4™ Patriot Series Rear Bumper for Ford Bronco 1966 - 1977 [RH-6100]

The RH4x4 Rear Bumper is one of our favorite products. Not only is it one of the only rear bumpers made out of 1/4" x 2" x 4" thick plate steel, it's also the easiest to install.

Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns.

Strength and Function
Your rear bumper has the potential to take more abuse than any other body armor on your Jeep. Whether its on road traffic collisions or off road rock damage, you need some serious armor to keep you safe. 1/4" thick plate steel is the ultimate armor to protect your vulnerable rear corners, tailgate, and fuel tank. High clearance corners and a weather resistance finish make this rear bumper a no brainer.

Ease of Installation
It does not take a PhD to install the best rear bumper and tire carrier on the market. No welding is required and the truly bolt on design makes your garage your own off road shop.


What comes in every kit:

  • Rear Bumper
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • 1/4" thick plate steel construction
  • Powder coat included
  • Unmatched quality and fitment





FAQ:
Is any welding required?
No. Our rear bumper is a DIY no-weld, truly bolt-in install.

What finishes are available?
Rock Hard 4x4 Rear Bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!



RH4X4 PRICE: $399.95
Rock Hard 4x4™ Freedom Series Front Bumper for Ford Bronco 1966 - 1977 [RH-6200] Rock Hard 4x4™ Freedom Series Front Bumper for Ford Bronco 1966 - 1977 [RH-6200]

All new for 2017! We've always wanted to make an action packed, easy to install, modern front bumper for the Ford Bronco. Fully loaded means just that - no compromises:

  • 1/4" Thick Steel
  • Flat Towable
  • Winch Ready
  • Recovery Tabs Included
  • Powder Coated
  • American Made
  • 100% Bolt On
  • Hardware Included
  • Fits Warn™ Zeon™ and PowerPlant™ Winches
Fully loaded - yet still upgradable!

Construction
It's one thing to be Made in USA. It's another to be given the time, quality, and craftsmanship only RH4x4 offers. Each front bumper is laser cut from 1/4" thick steel to live up to it's lifetime guarantee and give you precise fitment. It's then bent and formed into it's shape, hand welded, and ground down for a look no other manufacturer (overseas or domestic) can offer. Each bumper is then powder coated in house, by hand, individually - so every nook and cranny is protected. We sleep soundly at night knowing RH4x4 customers can play off road, winch, flat tow, and do-all with our armor installed, then rinse and repeat.

Ease of Installation
100% bolt on with all hardware included. Does not get much easier than that! All bumper mounting holes are laser cut and work with your existing frame mounting points.

Winch Ready
Included in our RH-6200 is our 1/4" thick, laser cut, CNC bent fairlead mounting plate. Will accept virtually all winches on the market.

Flat Towable
Simply add our bolt-on tow bar brackets (sold separately) and you're ready to go! Zero drilling required and all hardware included.


Upgrades Available
Optional Winch Guard with Light Mounting Tabs [RH-6201]


Optional Stinger Hoop(shown on RH-4014 Wrangler Bumper) [RH-6202]




What comes in every kit:
  • Front Bumper
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • 1/4" thick plate steel
  • Winch ready
  • Simple install



FAQ:
What winches fit this bumper?
All popular winches, including the best selling WARN VR and Zeon series - right up to the value packed PowerPlant, fit our bumpers. In fact, if you don't have a winch selected yet, Rock Hard 4x4 is an authorized WARN winch distributor. We can add any WARN winch you like to your pallet and you wouldn't pay any additional shipping. This ensures your entire upgrade arrives at the same time which speeds up install and gets you on the trail sooner! If you'd like to take a look at some of our favorite WARN winches we have in stock, please visit www.rockhard4x4.com/warn.

WARN Zeon PowerPlant Winch

Is any welding required?
No. Our front bumper mounting system allows for a DIY no-weld, truly bolt-in install.

What do I need to flat tow my Bronco?
If you have a Reese, Blue-Ox, or Road Master tow bar bracket we have the ultimate accessory for you. Because of our unique mounting method, you can simply bolt on the following mounts to our front bumper and have a perfect fitting adapter.
RH-8000-RS - Reese tow bar bracket kit
RH-8000-BO - Blue-Ox tow bar bracket kit
RH-8000- RM - Road Master tow bar bracket kit

What winches are compatible with our front bumpers?
Virtually all winches are compatible with our front bumpers.

What finish is available?
RH4x4 front bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!



RH4X4 PRICE: $449.95
Rock Hard 4x4™ Patriot Series Rear Bumper with Tire Carrier for Ford Bronco 1966 - 1977 [RH-6101] Rock Hard 4x4™ Patriot Series Rear Bumper with Tire Carrier for Ford Bronco 1966 - 1977 [RH-6101]

Rock Hard 4x4 is very proud to offer the strongest and most durable Rear Bumper and Tire Carrier that comes fully loaded, standard.

The RH4x4 Rear Bumper and Tire Carrier is one of our favorite products. Not only is it the only rear bumper with integrated tire carrier made out of 3/16" x 2" x 4" thick plate steel, it's also the easiest to use. We've seen people struggle to open or close their tire carrier cage and thought, "that'll never be me". That never will be you with our proprietary dual-stage latching mechanism and "pre-load" design to prevent vibration and wobbling.

Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns. Plus, with oversized tires, rubbing and tire gouging is never a concern.

Strength and Function
Your rear bumper has the potential to take more abuse than any other body armor on your Ford. Whether its on road traffic collisions or off road rock damage, you need some serious armor to keep you safe. High clearance corners, user friendly "1-finger operation" latch, and a weather resistance finish make this rear bumper combo a no brainer.

The secret to our tire carrier's success is our in house designed and constructed hub assembly. Instead of a single bearing system like competing models, we use a dual bearing and race combo for smooth and consistently reliable operation. See our components section below for complete details.

All this strength adds up to one of the best spare tire size carrying capacities on the market: a massive 37" tire!

Ease of Installation
It does not take a PhD to install the best rear bumper and tire carrier on the market. No welding is required and the truly bolt on design makes your garage your own off road shop.

Components
RH4x4 Rear Bumpers and Tire Carriers are very recognizable for two major reasons: owners bragging about how durable it is and it's clean, functional design. What makes up a RH4x4 Rear Bumper and Tire Carrier is what makes it so strong.

Newest design allows you to move your spare tire up and down or in and out for best fitment and visibility.


Integrated 2" receiver hitch included in every rear bumper.


Safety pin to prevent tire carrier closure when you are stopped on an angle and accessing rear compartment.



Integrated welded on CB antenna mounts standard on every tire carrier.


Integrated Hi-Lift jack mount standard on every tire carrier.


Zerk style grease fitting to service hub assembly.


Welded on heavy duty recovery shackle tabs. Our tabs are welded onto the face, travel through the bumper, and are again welded onto the backside of the bumper's skin. This is standard Rock Hard 4x4 ingenuity and simply not offered by other manufacturers.



What comes in every kit:

  • Rear Bumper
  • Tire Carrier with integrated hi-lift jack mount and CB tabs
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • 3/16 x 2" x 4" thick plate steel construction
  • Integrated tire carrier
  • Unmatched quality and fitment




FAQ:
What size spare tire can I run?
Factory Jeep Wrangler up to 37" spare tire.

Is any maintenance required?
Period greasing of hub assembly is suggested. Simply add grease to the included zerk fitting in the hub assembly after water cross, rain storm, etc.

Is any welding required?
No. Our rear bumper and tire carrier is a DIY no-weld, truly bolt-in install.

Do I need to add a CB antenna or Hi-Lift jack mount?
No. Every tire carrier ships with a CB and Hi-Lift jack mount standard.

What finishes are available?
Rock Hard 4x4 Rear Bumpers and Tire Carriers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!



RH4X4 PRICE: $1,099.95

(1)