Rock Hard 4x4 is very proud to offer the heaviest duty and highest quality Full Width front bumper for the Jeep Cherokee XJ 2/4DR and Comanche 1984 - 2001.
We have a special place in our hearts for this front bumper. Our full width is our top of the line flagship armor upgrade for the XJ and Comanche. It looks as good as it performs and when you see one installed on a stranger's Jeep you want to walk over and touch it. Clean lines, exact fitment, and included features make it the undisputed leader in XJ and Comanche full width offerings.
With so many bolt on options available this is also one of the most versatile bumpers out there!
Not all bumpers can tackle all trails. Sometimes it takes a full width, tire covering, fender protecting, 1/4" thick plate steel bumper to survive your toughest adventures. This is that bumper. It's the big kid on the block with a look that's all it's own. Bolt on winch mount and brush guard ready and installs in minutes - our full width is a healthy does of bolt on armor that will cure what ails ya'.
It's one thing to be Made in USA. It's another to be given the time, quality, and craftsmanship only RH4x4 offers. Each front bumper is laser cut from 3/16" center and 1/4" thick outer section steel to live up to it's lifetime guarantee and give you precise fitment. It's then bent and formed into it's shape, hand welded, and ground down for a look no other manufacturer (overseas or domestic) can offer. Each bumper is then powder coated in house, by hand, individually - so every nook and cranny is protected. The inner structure is a geometry test of gussets and support. We sleep soundly at night knowing RH4x4 customers can play off road, winch recover, tow, and do-all with our armor installed, then rinse and repeat.
Rock Hard Cherokee XJ and Comanche Front Bumpers are made out of 3/16" x 2" x 5 " thick tubing in the center and with outer edges that are made of 1/4" plate.
Our bumper is more than a plate of steel, it's a fully loaded road armor upgrade bolted to the front of your Jeep. With standard included upgrades like double welded recovery shackle tabs and straight to the frame horn mounting - our bumpers scream Premium. Maybe that's why they are such head turners. When you see a RH4x4 front bumper on the trail - you just get it.
This bumper uniquely hugs your frame as closely as possible giving you maximum approach angle for extreme off road adventures.
Ease of Installation
It's been known to take longer to uninstall your OEM front bumper than it takes to install our front bumper. This is achieved through our unique "DTF" or Direct-to-Frame mounting method. This gives us not only a precise mounting location to your frame horns it also makes for the most secure way to mount your bumper. Plus, unlike overseas produced bumpers with a "one size misfits all" approach, we don't cut any corners when it comes to one of the most important upgrades you can add to your Jeep.
RH4x4 Front Bumpers are very recognizable for two major reasons: owners bragging about how strong it is and it's innovative features that come standard. What makes up a RH4x4 bumper is what makes them so strong.
Extreme approach angle. By tucking our bumper as close to your grille as possible we gain an industry leading approach angle.
Double welded recovery tabs. We go a step further than competitors by not only welding the front of our recovery tabs to your bumper skin, but then also spin the bumper around and weld the backside as well. Strength and confidence only found in a RH4x4 bumper. Our heavy duty Recovery Shackles can be found here.
Driver and Passenger sides feature tapered and welded end plates that not only give you clearance for larger tires but protect your front quarter panels, grilles, and marker lights.
Hand welded / ground finish - our bumpers look gorgeous because of their individualized finish work. Prior to powder coat each bumper is given it's own moment in the spotlight. We hand weld all our bumpers then grind down the welds. This gives us the opportunity to spot any defects or imperfections prior to shipping to guarantee you receive a gorgeous looking armor upgrade.
OPTIONAL bolt on winch mount RH-1015-A gives you the option to mount a recovery winch. The winch mount also has a welded on mini stinger and integrated fairlead mount. The stinger protects your winch from damage if not running our optional grille guard (RH-1015-BG).
OPTIONAL bolt on brush guard RH-1015-BG gives you the option to add a grille guard for ultimate front end protection. The guard is angled forward to help protect your grille and deflect branches.
What comes in every kit:
- Front Bumper
- Installation Instructions
Three Reasons Why:
- 1/4" thick plate steel outer sections
- Maximum approach angle
- Full width coverage
Some early XJ models do not have removable lower fender/fender flare. This will require trimming.
Is any welding required?
No. Our front bumper mounting system allows for a DIY no-weld, truly bolt-in install.
What is this bumper made of?
3/16" center and 1/4" thick plate steel.
What finish is available?
RH4x4 front bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.
Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!