Rock Hard 4x4 is very proud to offer the heaviest duty and highest quality Full Width front bumper for the Jeep CJ5, CJ7, CJ8, YJ, TJ, and LJ 1976 - 2006.
Our full width front bumper is our flagship armor upgrade. It looks as good as it performs and when you see one installed on a stranger's Jeep you want to walk over and touch it. Clean lines, exact fitment, and included features make it the undisputed leader in CJ and Wrangler full width offerings.
Being a "lowered winch mount" also gives you less obstructed airflow to your grille.
Not all bumpers can tackle all trails. Sometimes it takes a full width, tire covering, fender protecting, 1/4" thick plate steel bumper to survive your toughest adventures. This is that bumper. It's the big kid on the block with a look that's all it's own. Winch ready and installs in minutes - our full width is a healthy does of bolt on armor that will cure what ails ya'.
Bumper weight: 73 lbs.
11" deep (outside of grille guard hoop to back of bumper - butts up to sway bar mount).
15" tall (from top of grille guard hoop to bottom of bumper)
11" inner height (top of grille guard hoop to winch mounting plate - winch mounting plate rests on top of frame rails)
3.5" hoop depth (outside of grille guard hoop to front of bumper)
It's one thing to be Made in USA. It's another to be given the time, quality, and craftsmanship only RH4x4 offers. Each front bumper is laser cut from 1/4" thick steel to live up to it's lifetime guarantee and give you precise fitment. It's then bent and formed into it's shape, hand welded, and ground down for a look no other manufacturer (overseas or domestic) can offer. Each bumper is then powder coated in house, by hand, individually - so every nook and cranny is protected. We sleep soundly at night knowing RH4x4 customers can play off road, winch recover, tow, and do-all with our armor installed, then rinse and repeat.
Our bumper is more than a plate of steel, it's a fully loaded road armor upgrade bolted to the front of your Jeep. With standard included upgrades like light mounting tabs set 10" apart to fit the leading LED light bars, pre-drilled winch mounting holes, full width protection - our bumpers scream Premium. Maybe that's why they are such head turners. When you see a RH4x4 front bumper on the trail - you just get it. 1" recovery tabs come standard, along with laser cut holes for our optional tow bar brackets and steering box skid plate.
This bumper uniquely positions your winch between your frame rails, not flush or standard (high) mount. This keeps virtually all winches compatible with our bumper with only minor trimming required for even the largest winches like the Warn(TM) PowerPlant.
Ease of Installation
It's been known to take longer to uninstall your OEM front bumper than it takes to install our front bumper. This is achieved through our unique "DTF" or Direct-to-Frame mounting method. This gives us not only a precise mounting location to your frame horns it also makes for the most secure way to mount your bumper. Plus, unlike overseas produced bumpers with a "one size misfits all" approach, we don't cut any corners when it comes to one of the most important upgrades you can add to your Jeep.
RH4x4 Front Bumpers are very recognizable for two major reasons: owners bragging about how strong it is and it's innovative features that come standard. What makes up a RH4x4 bumper is what makes them so strong.
Wide winch well allows for winches of all sizes including the massive Warn(TM) PowerPlant! Bumper face comes laser cut for fairlead mounting.
Tabs are welded onto bumper hoop for aftermarket accessory lighting.
Laser cut optional Steering Box Skid Plate mounting point. Learn more about RH4x4 Steering Box Skid Plates here.
Double welded recovery tabs. We go a step further than competitors by not only welding the front of our recovery tabs to your bumper skin, but then also spin the bumper around and weld the backside as well. Strength and confidence only found in a RH4x4 bumper. Our heavy duty Recovery Shackles can be found here.
Flat towing ready! Simply add our bolt-on tow bar brackets (sold separately) and you're ready to go! Zero drilling required and all hardware included.
What comes in every kit:
- Front Bumper
- Installation Instructions
Three Reasons Why:
- 1/4" thick plate steel
- Winch ready
- Full width coverage
What winches fit this bumper?
All popular winches, including the best selling WARN VR and Zeon series - right up to the value packed PowerPlant, fit our bumpers. In fact, if you don't have a winch selected yet, Rock Hard 4x4 is an authorized WARN winch distributor. We can add any WARN winch you like to your pallet and you wouldn't pay any additional shipping. This ensures your entire upgrade arrives at the same time which speeds up install and gets you on the trail sooner! If you'd like to take a look at some of our favorite WARN winches we have in stock, please visit www.rockhard4x4.com/warn.
Is any welding required?
No. Our front bumper mounting system allows for a DIY no-weld, truly bolt-in install.
What do I need to flat tow my Wrangler?
If you have a Reese, Blue-Ox, or Road Master tow bar bracket we have the ultimate accessory for you. Because of our unique mounting method, you can simply bolt on the following mounts to our front bumper and have a perfect fitting adapter.
RH-8000-RS - Reese tow bar bracket kit
RH-8000-BO - Blue-Ox tow bar bracket kit
RH-8000- RM - Road Master tow bar bracket kit
What winches are compatible with our front bumpers?
Virtually all winches are compatible with our front bumpers.
Is this a Lowered Winch Mount or Standard (flush height)?
This is a Lowered mounting plate bumper.
What finish is available?
RH4x4 front bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.
Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!