Home > SHOP BY RIG >

Rock Hard 4x4™ Patriot Series Full Width Front Bumper w/ Receiver for Jeep CJ5, CJ7, CJ8, YJ, TJ, and LJ 1976 - 2006 [RH-4011]

Rock Hard 4x4™ Patriot Series Full Width Front Bumper w/ Receiver for Jeep CJ5, CJ7, CJ8, YJ, TJ, and LJ 1976 - 2006 [RH-4011]
Winch not included. Bumper ships powder coated black - raw available upon request.


 
Additional Views:


RH4X4 FEATURES:
  • 100% Bolt on Install
  • Built in 2" Receiver
  • Tow Bar Bracket Available
  • Fits All Popular Winches
  • Black Powder Coat Finish
  • 100% Made in USA
  • Lifetime Warranty
RH4X4 PRICE: $749.95

FINISH: Black Powder Coat
California Residents WARNING
. Please click here for your Propsition 65 warning.

NOTE: Truck Freight Shipping Required
Part Number: RH-4011


Add Tow Bar Brackets*:


Add Steering Box Skid Plate*:


Add D-Ring Shackles*:


Qty:  
RH4X4 Product Info RH4x4 Installation Manual RH4X4 Warranty Info
 
Rock Hard 4x4 is very proud to offer the heaviest duty and highest quality Full Width front bumper with receiverfor the Jeep CJ5, CJ7, CJ8, YJ, TJ, and LJ 1976 - 2006.

Welded 2" front receiver included. Perfect for moving a trailer around in tight spaces or down a boat ramp, beach fishing pole holders, and mounts for an overhead canoe rack. Our full width front bumper is our flagship armor upgrade. It looks as good as it performs and when you see one installed on a stranger's Jeep you want to walk over and touch it. Clean lines, exact fitment, and included features make it the undisputed leader in CJ and Wrangler full width offerings.

Being a "lowered winch mount" also gives you less obstructed airflow to your grille.

Not all bumpers can tackle all trails. Sometimes it takes a full width, tire covering, fender protecting, 1/4" thick plate steel bumper to survive your toughest adventures. This is that bumper. It's the big kid on the block with a look that's all it's own. Winch ready and installs in minutes - our full width is a healthy does of bolt on armor that will cure what ails ya'.

Bumper weight: 73 lbs.

Dimensions
59" wide
11" deep (outside of grille guard hoop to back of bumper - butts up to sway bar mount).
15" tall (from top of grille guard hoop to bottom of bumper)
11" inner height (top of grille guard hoop to winch mounting plate - winch mounting plate rests on top of frame rails)
3.5" hoop depth (outside of grille guard hoop to front of bumper)

Construction
It's one thing to be Made in USA. It's another to be given the time, quality, and craftsmanship only RH4x4 offers. Each front bumper is laser cut from 1/4" thick steel to live up to it's lifetime guarantee and give you precise fitment. It's then bent and formed into it's shape, hand welded, and ground down for a look no other manufacturer (overseas or domestic) can offer. Each bumper is then powder coated in house, by hand, individually - so every nook and cranny is protected. We sleep soundly at night knowing RH4x4 customers can play off road, winch recover, tow, and do-all with our armor installed, then rinse and repeat.

Features
Our bumper is more than a plate of steel, it's a fully loaded road armor upgrade bolted to the front of your Jeep. With standard included upgrades like light mounting tabs set 10" apart to fit the leading LED light bars, pre-drilled winch mounting holes, full width protection - our bumpers scream Premium. Maybe that's why they are such head turners. When you see a RH4x4 front bumper on the trail - you just get it. 1" recovery tabs come standard, along with laser cut holes for our optional tow bar brackets and steering box skid plate.

This bumper uniquely positions your winch between your frame rails, not flush or standard (high) mount. This keeps virtually all winches compatible with our bumper with only minor trimming required for even the largest winches like the Warn(TM) PowerPlant.

Ease of Installation
It's been known to take longer to uninstall your OEM front bumper than it takes to install our front bumper. This is achieved through our unique "DTF" or Direct-to-Frame mounting method. This gives us not only a precise mounting location to your frame horns it also makes for the most secure way to mount your bumper. Plus, unlike overseas produced bumpers with a "one size misfits all" approach, we don't cut any corners when it comes to one of the most important upgrades you can add to your Jeep.

Components
RH4x4 Front Bumpers are very recognizable for two major reasons: owners bragging about how strong it is and it's innovative features that come standard. What makes up a RH4x4 bumper is what makes them so strong.

Wide winch well allows for winches of all sizes including the massive Warn(TM) PowerPlant! Bumper face comes laser cut for fairlead mounting.


Tabs are welded onto bumper hoop for aftermarket accessory lighting.


Laser cut optional Steering Box Skid Plate mounting point.
Learn more about RH4x4 Steering Box Skid Plates here.


Double welded recovery tabs. We go a step further than competitors by not only welding the front of our recovery tabs to your bumper skin, but then also spin the bumper around and weld the backside as well. Strength and confidence only found in a RH4x4 bumper.
Our heavy duty Recovery Shackles can be found here.


Flat towing ready! Simply add our bolt-on tow bar brackets (sold separately) and you're ready to go! Zero drilling required and all hardware included.




What comes in every kit:
  • Front Bumper
  • Installation Instructions

Three Reasons Why:
  • 1/4" thick plate steel
  • Winch ready
  • Full width coverage



FAQ:
What size receiver is included?
2"

What winches fit this bumper?
All popular winches, including the best selling WARN VR and Zeon series - right up to the value packed PowerPlant, fit our bumpers. In fact, if you don't have a winch selected yet, Rock Hard 4x4 is an authorized WARN winch distributor. We can add any WARN winch you like to your pallet and you wouldn't pay any additional shipping. This ensures your entire upgrade arrives at the same time which speeds up install and gets you on the trail sooner! If you'd like to take a look at some of our favorite WARN winches we have in stock, please visit www.rockhard4x4.com/warn.

WARN Zeon PowerPlant Winch

Is any welding required?
No. Our front bumper mounting system allows for a DIY no-weld, truly bolt-in install.

What do I need to flat tow my Wrangler?
If you have a Reese, Blue-Ox, or Road Master tow bar bracket we have the ultimate accessory for you. Because of our unique mounting method, you can simply bolt on the following mounts to our front bumper and have a perfect fitting adapter.
RH-8000-RS - Reese tow bar bracket kit
RH-8000-BO - Blue-Ox tow bar bracket kit
RH-8000- RM - Road Master tow bar bracket kit

What winches are compatible with our front bumpers?
Virtually all winches are compatible with our front bumpers.

Is this a Lowered Winch Mount or Standard (flush height)?
This is a Lowered mounting plate bumper.

What finish is available?
RH4x4 front bumpers ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this bumper made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!






RH4x4 suggests:
Rock Hard 4x4™ Roller Fairlead License Plate Mount w/ Cable Lanyard [RH-4006-F] 9500lb 3/4" Galvanized Recovery Clevis with HD 7/8" Pin [RH-4003] Rock Hard 4x4™ Winch Fairlead Light Mount [RH-6065]
RH4X4 PRICE: $34.95

Add
RH4X4 PRICE: $16.95

Add
RH4X4 PRICE: $34.95

Add
Rock Hard 4x4™ Roller Fairlead License Plate Mount w/ Cable Lanyard [RH-4006-F] 9500lb 3/4" Galvanized Recovery Clevis with HD 7/8" Pin [RH-4003] Rock Hard 4x4™ Winch Fairlead Light Mount [RH-6065]

Average Customer Review: 4.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
July 17, 2018
Reviewer: Mark from Galien, MI United States  
Excellent product, quality built. Installation went well and looks like it will last. I like the design and function of the bumper will be adding a winch at a later date. Would have rated a five if shipping of product was faster but well worth the wait. Customer service was very good. It took about 5 weeks to get the order. Totallly satisfied 2006 wrangler unlimited rubicon.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Front Bumper March 12, 2017
Reviewer: James B from Alabama  
Fits and looks great.

Was this review helpful to you?


Browse for more products in the same category as this item:

SHOP BY RIG
SHOP BY UPGRADE
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Wrangler LJ (2003-2006)
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Wrangler TJ (1997-2006)
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Wrangler YJ (1987-1995)
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Jeep CJ8 (1981-1986)
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Jeep CJ7 (1976-1986)
SHOP BY UPGRADE > BUMPERS / WINCH PLATES > Jeep CJ5 (1955-1983)
SHOP BY RIG > Wrangler LJ (2003-2006) > BUMPERS
SHOP BY RIG > Wrangler TJ (1997-2006) > BUMPERS
SHOP BY RIG > Wrangler YJ (1987-1995) > BUMPERS
SHOP BY RIG > Jeep CJ8 (1981-1986) > BUMPERS
SHOP BY RIG > Jeep CJ7 (1976-1986) > BUMPERS
SHOP BY RIG > Jeep CJ5 (1955-1983) > BUMPERS
SHOP BY UPGRADE > BUMPERS / WINCH PLATES
SHOP BY RIG > Wrangler LJ (2003-2006)
SHOP BY RIG > Wrangler TJ (1997-2006)
SHOP BY RIG > Wrangler YJ (1987-1995)
SHOP BY RIG > Jeep CJ8 (1981-1986)
SHOP BY RIG > Jeep CJ7 (1976-1986)
SHOP BY RIG > Jeep CJ5 (1955-1983)