Home > NEW PRODUCTS >

Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Gladiator JT 2020 - Current [RH-80515]

Rock Hard 4x4™ Bolt-On Front and Rear Lower Control Arm Skid Plates for Jeep Gladiator JT 2020 - Current [RH-80515]


 
Additional Views:


RH4X4 FEATURES:
  • 1/4" Thick Steel
  • 100% Bolt on Install
  • Fits All Control Arm Joints
  • Black Powder Coat Finish
  • 100% Made in USA
  • Lifetime Warranty
RH4X4 PRICE: $174.95
FINISH: Black Powder Coat
California Residents WARNING
. Please click here for your Propsition 65 warning.

Part Number: RH-80515
Qty:

RH4X4 Product Info RH4x4 Installation Manual RH4X4 Warranty Info
 
Rock Hard 4x4 is very proud to offer the Heaviest Duty 1/4" Thick Control Arm and Rear Shock Skid Plates for the Jeep JT.

100% bolt-on skid plates for your vulnerable front and rear lower control arm mounts and rear shock mounts. The OEM JT control arm mounts aren't braced or skid plated and are the lowest points on your rig. First to hit, first to break!

Our 1/4" thick skid plates are made from a solid sheet of steel then bent, formed, and hand welded into it's highly protective shape. Notched for zerk grease fittings found on common control arm joint upgrades.

Control Arm Skid Fitment
2020 - Current Jeep JT

Strength
Our skid plate system is the industry standard because of the confidence it instills in each and every customer. Each control arm skid is laser cut from 1/4" thick steel coated in our weather and debris resistant powder coat finish. Strength is proven on virtually all Jeep enthusiast forums with glowing reviews. Since 2007 our skid plate system has been the undisputed leader in undercarriage protection.

What comes in every kit:
  • Driver and Passenger Side Skid Plates
  • Rear Shock Mount Skid Plates
  • Hardware
  • Installation Instructions

Three Reasons Why:
  • Installs in minutes
  • 1/4" thick plate steel
  • Unmatched quality and fitment

FRONT NOTE: Not compatible with alignment cam bolts.




FAQ:
Why not weld on skid plates?
Unless you have hours to kill, not to mention a welder, go for it. We've found however that even weld-on versions aren't 1/4" thick steel.

Will these spin off during a hard impact?

No. Built in retention bends prevent the skid plate from rotating backwards.

Is any welding required?
No. Our mounting method allows for a DIY no-weld, truly bolt-in install.

What finish is available?
Rock Hard 4x4 skid plates ship powder coated black with a semi-smooth, semi-gloss finish.

Where is this mount made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!




Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 7 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Good fit and finish August 20, 2021
Reviewer: Aaron from Washington  
Chosen as affordable protection for the low hanging bits. Nice powder coat, steel was thick and no rough edges or misaligned holes.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Just Great! June 8, 2021
Reviewer: Rory from VANCOUVER, WA United States  
Nothing but good things to say about my experience. Super fast response to email and fast shipping! Product fit and finish were excellent, all needed parts were included!

Great stuff!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 19, 2021
Reviewer: Roger Parts are very beffy and fit well from Republic, MO United States  
Parts are very beefy and fit well. Powder coat has a nice finish. I had only had my Jeep out once  and noticed a huge gouge in the front lower control arm. I decided this was a must have when I installed the lift.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 12, 2021
Reviewer: from ,  
great product   installed it myself was somewhat of a chore.  need to buy longer bolts as the oem ones were to short

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 29, 2020
Reviewer: John Weatherwax from Oxnard, CA United States  
so far they are  good have not put them to the test but they install fairly easy

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

NEW PRODUCTS
SHOP BY RIG > Jeep > Gladiator JT (2020-Current) > SKID PLATES / UNDERCARRIAGE
SHOP BY UPGRADE > SKID PLATES / UNDERCARRIAGE > Gladiator JT (2020-Current)
SHOP BY UPGRADE > SKID PLATES / UNDERCARRIAGE
SHOP BY RIG > Jeep > Gladiator JT (2020-Current)