Rock Hard 4x4™ Patriot Series Rear Bumper for Jeep Wrangler JL 2018

Home > NEW PRODUCTS >

Rock Hard 4x4™ Patriot Series Rear Bumper for Jeep Wrangler JL 2018 - Current [RH-90300]

Options not included may be shown.

Additional Views:

RH4X4 FEATURES:

1/4" Thick Steel
Sensor Compatible
Integrated License Plate Mount
Integrated 2" Receiver
Black Powder Coat Finish
100% Made in USA
Lifetime Warranty

RH4X4 PRICE: $1,099.95

Price with Selected Options: $1,099.95

FINISH: Black Powder Coat
California Residents

WARNING
. Please click here for your Propsition 65 warning.

NOTE: Truck Freight Shipping Required
Part Number: RH-90300

Add Tire Carrier Adapter*:
Add JL Muffler Skid Plate*:
Add D-Ring Shackles*:		(ideal for front bumper safety chain cables)

Qty:

RH4X4 Product Info

RH4x4 Installation Manual/Video

RH4X4 Warranty Info

Fits all 2018 - Current Jeep Wrangler JL models, not compatible with factory tire carrier. RH-90347 or RH-90350 required or other aftermarket tire carrier relocation bracket required. Raising the bumper increases off road clearance.

We believe armor should be stronger than the vehicle. We believe upgrades should be heavy duty, premium, and easy to install. If you do too, the ultimate rear bumper for the Wrangler JL is here!

Fully loaded and incredibly strong, the Patriot Series Rear Bumper RH-90300 retains every single factory option moved to a 1/4" thick steel armor upgrade.

100% bolt-on installation makes removing your factory bumper and upgrading to a Patriot Series rear bumper doable by any level installer.

Features

1/4" thick plate steel
100% bolt-on design
Frame mounted bumper (zero weight on tailgate/body)
Parking sensor compatible (grommets included)
- Plastic plugs included if not sensor equipped
Integrated 2" tow-rated receiver
Integrated safety chain attachments
High clearance tapered sides
Towing electronics port provision (block off plate included)
1" thick double welded recovery tabs included
Powder coat included
All hardware included

Specifications
Weight: 88 lbs.
Width: 70"
28" or larger spare tire requires RH-90347 or RH-90350

Construction
License plate mount included with light provision.

Parking/reverse sensor compatible.

High clearance design to maximize departure angle.

Included laser cutout for rear receiver wiring. Block off plate included.

FAQ
Why don't you offer recessed lighting like some other brands?
Rock Hard 4x4 parts must work as good as they look and in the real world the reverse lighting solutions offered by other brands don't function very well at all. When reversing, you don't need lighting straight back - you need lighting back and to the sides to help guide you in the dark. That's why we don't lock you into a poor solution that's in reality a gimmicky solution. Instead, we suggest you mount your choice of back up lights to the top of our bumper, on the sides, and aim them at angles.

RH4x4 suggests:

Rock Hard 4x4™ Billet Aluminum Hinge Braces for Jeep Wrangler JL 2018 - Current [RH-90345]

Rock Hard 4x4™ Freedom Series Body Mount Tire Carrier with Billet Aluminum Braces for Jeep Wrangler JL 2018 - Current [RH-90350]

9500lb 3/4" Galvanized Recovery Clevis with HD 7/8" Pin [RH-4003]

Rock Hard 4x4™ Adjustable Spare Tire Carrier with CB Antenna Mount for Jeep Wrangler JL 2018 - Current [RH-90347]

RH4X4 PRICE: $679.95

Add

RH4X4 PRICE: $899.95

Add

RH4X4 PRICE: $19.95

Add

RH4X4 PRICE: $179.95

Add

Average Customer Review: Average Customer Review: 5 of 5

5 of 5 Total Reviews: 4 Write a review.

0 of 0 people found the following review helpful:

	November 22, 2022
Reviewer: Jamie Wells from Lagrange, KY United States

Was this review helpful to you?

0 of 0 people found the following review helpful:

A great bumper	June 20, 2022
Reviewer: Jack Sheahan from Bakersfield CA

If installing the skid plate over the DEF tank AND you have the Rockhard rear bumper, it will be easier down the road if you ever need to remove that skid plate to cut access slots in the bumper where the two flanges attach. Otherwise you will need to remove the bumper and tire carrier (if installed) just to get at two bolts. You cannot just drill two holes as there is not enough room to slid the flange out from under the bumper. So just cut an access in the bumper about 75% or so the length of the flange and 100% of the width. This will return it to the 3 minute job that it should be rather than a couple of hours and the help of someone else to remove the bumper, especially if it is steel. Don't forget to prime and paint the cutout as it will rust as it is steel

Was this review helpful to you?

0 of 0 people found the following review helpful:

If you have to get rear ended	January 20, 2022
Reviewer: Mikel Quiett from Shelton, WA United States

This is so superior to the plastic rear factory bumper with the additional guard and tire carrier my new 35" fit right and secure.I also have your front bumper for towing and winching Your bumpers are like armor compared to the flimsy pretenders. Thanks for a superior quality product

Was this review helpful to you?

0 of 0 people found the following review helpful:

	February 13, 2021
Reviewer: Leonard Rickett from New Castle , VA United States

Quality product and straight forward install

Was this review helpful to you?

Browse for more products in the same category as this item:

SHOP BY UPGRADE > BUMPERS / TIRE CARRIERS
SHOP BY RIG > Jeep > Wrangler JL (2018-Current)
NEW PRODUCTS
SHOP BY UPGRADE > BUMPERS / TIRE CARRIERS > Wrangler JL (2018-Current)
SHOP BY RIG > Jeep > Wrangler JL (2018-Current) > BUMPERS / TIRE CARRIERS