Rock Hard 4x4™ HardHat™ Differential Cover Black for Front/Rear Dana 44 [RH-9053]

Home > NEW PRODUCTS >

Additional Views:

RH4X4 FEATURES:

1/4" Thick Steel
100% Bolt on Install
Black Powder Coat Finish
100% Made in USA
Lifetime Warranty

RH4X4 PRICE: $74.95

FINISH: Black Powder Coat
Proposition 65 Warning for California Residents

WARNING
. Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects.
. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.
. For more information go to www.P65Warnings.ca.gov/passenger-vehicle/

Part Number: RH-9053

Qty:

RH4X4 Product Info

RH4x4 Installation Manual

RH4X4 Warranty Info

Rock Hard 4x4 is very proud to offer the Heaviest Duty 1/4" Thick Steel Differential Cover for the Dana 44 Housing.

Our Differential HardHat's™ are designed to offer maximum protection where your rig needs it most. The factory differential cover offers minimal protection and provides zero deflection. In minutes, you can install a 1/4" thick plate steel cover with built-in impact deflecting angles. We've laser cut-out an oil change cutout to make servicing a breeze.

Million Dollar Question:
Why not a full differential cover replacement? Same reason we do not attach our best-selling JK Oil Pan Skid Plate directly to the oil pan. We are moving hard impacts away from your internals as far as we can, while maintaining clearance for your suspension/track bars. This gives you the best of both worlds: Ultimate 1/4" thick steel drive train protection with maximum off road clearance.

What comes in every kit:

Differential Cover HardHat™
Zinc-coated Hardware
Installation Instructions
Preinstalled Stainless Steel Backing Plate

Three Reasons Why:

Protects critical drivetrain components
1/4" thick plate steel
Simple hand tool install

FAQ:
What track bars and/or tie-rods are compatible?
These covers were designed with factory tie rods and track bars in mind. You can use these measurements to help you decide if there is enough clearance for your particular aftermarket application:
OEM differential cover to face of HardHat™ at furthest point RH-9051 D44 mounted HardHat: 3/8"

What finish is available?
Rock Hard 4x4 Diff HardHat's™ ship in a black light texture powder coat finish.

Where is this made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!