Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Wrangler JK 2DR.

RHX SERIES: These are built with the same strength and durability as our Patriot Series Sliders, but now include a single top plate with traction enhancing dimple punches.

The RH4x4 Jeep JK 2DR Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!

Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.

Functional Design
Each mounting rail is 2" x 3" .188 wall (3/16") thick steel making them indestructible rock crushers. Factory Rubicon sliders are built from .120 wall (1/8") thick steel. For those who were better writers than adders in school, our sliders are 56% thicker.

Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside. Factory sliders have plastic pressed in end caps.

Our welded brackets to the body mount locations are 3/8" thick steel. They don't even exist on the factory Rubicon Rails so we'll call that a 100% thickness upgrade.

We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.

Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.

Components
RH4x4 Rocker Guards are very recognizable for two major reasons: owners bragging about the trail they just conquered and how strong they look. What goes into a RH4x4 Rocker Guard set is what makes them so strong.

Heavy duty tube slider protects your body panels.

Count on our tubular slider to not only protect your body - but give you a great 3.5" step!

Extremely heavy duty construction over factory mounts. This is why we do not simply bolt "over" the factory rails - we completely replace them!

3 body mounts are used - not 2 like import versions of our American made slider.

Tapered to follow body lines plus give clearance for up to 38" tires without modification.

What comes in every kit:

Driver and Passenger side Tubular Rocker Guards
Hardware
Installation Instructions

Three Reasons Why:

Ease of installation
Thickness and strength
Unmatched quality and fitment

FAQ:
Is any welding required?
No. Our Rocker Guards are a bolt-on install.

Commonly asked dimensions:
Door outwards to top of rail: 4" (step out distance)
Distance from bottom of door cutout to top of rail: 3.5" (step down distance)
Distance from rectangular rail to top of tube: 0" (distance rail sticks up from top of rail)

Body lift compatible?
No.

Why don't we simply mount "around" my OEM Rubicon rails?
To mount around your Rubicon rails we'd have to eliminate our welded in studs along the sides of our rails. This would greatly lessen their mounting strength and ability to distribute load along the rail. We choose to replace your Rubicon rail completely so we can mount in more places along your Jeep's body.

Longer bolt size:
12mm x 1.75 (1-3/4") x 120mm

Is any trimming required to the OEM fenders prior to Tubular Rocker Guard installation?
No. You do not have to trim your OEM fenders at all for clearance. Some other competing sliders require trimming up to 5/8" of an inch off your plastic fenders.

What finish is available?
RH4x4 Rocker Guards ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this Rocker Guard set made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

SEARCH

SEARCH

Shop by Upgrade

Shop by Rig

Compatible Accessories

Installation Videos

ROCK SLIDERS / ROCKER GUARDS

Choose a sub category:

JOIN OUR E-NEWSLETTER FOR THE LATEST UPDATES

ABOUT US

MY ACCOUNT

HELPFUL INFO

QUESTIONS? CONTACT US!