Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on rocker guards for the Jeep Wrangler JL.

2026 FRONT FRAME BRACE COMPATIBILITY: Our sliders are fully compatible with the new factory front frame braces. Simply unbolt them prior to install, install our sliders, then reinstall the braces if you wish to.

Designed for Jeep owners who want real rocker protection without the bulk, the Freedom Series delivers factory-style defense in a minimalist package. Modeled after the proven Rubicon rock rails but built tougher with heavy-duty American steel, these guards clamp directly to the pinch seam and hug the body for a flush, OEM+ look.

Why thousands of Jeep owners are choosing “no-tube” rocker guards:Ultra-clean appearance – no protruding tube to interrupt the Jeep’s lines:

Significantly lighter than traditional sliders (save 20 lbs per side)
Maximum daily-driver friendliness – won’t ding doors in parking lots or hang up on curbs
No dirty step to rub on your pants in winter or after the trail
Preserves ground clearance – nothing hanging lower than the frame
Perfect for mild to moderate trails while still shielding the rocker panel and pinch weld
Lower cost than full tubular sliders without sacrificing real-world protection
Bolt-on installation, no drilling, fully reversible

If you love the capability of a built Jeep but hate unnecessary bulk, the Freedom Series Rocker Guards give you exactly what you need — and nothing you don’t.

If your trim level left your rocker panels exposed to the elements our Freedom Series Rocker Guards are an excellent place to start. Looking for even more protection with RH4x4 Tubular Rocker Guards? - click here.

Functional Design
Each mounting rail is 2" x 3" .188 wall (3/16") thick steel making them indestructible rock crushers. Factory Rubicon sliders are built from .120 wall (1/8") thick steel. For those who were better writers than adders in school, our sliders are 56% thicker.

Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside. Factory sliders have plastic pressed in end caps.

Our welded brackets to the body mount locations are 3/8" thick steel. They don't even exist on the factory Rubicon Rails so we'll call that a 100% thickness upgrade.

Clearance
Each Freedom Rocker Guard extends 2-3/4" out from pinch weld.

Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width plus through the floor of your JL in existing holes. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.

What comes in every kit:

Driver and Passenger side Rocker Guards
Hardware
Installation Instructions

Three Reasons Why:

Ease of installation
Thickness and strength
Unmatched quality and fitment

FAQ:
Is any welding required?
No. Our Rocker Guards are a bolt-on install.

Body lift compatible?
No.

Why don't we simply mount "around" my OEM Rubicon rails?
To mount around your Rubicon rails we'd have to eliminate our welded in studs along the sides of our rails. This would greatly lessen their mounting strength and ability to distribute load along the rail. We choose to replace your Rubicon rail completely so we can mount in more places along your Jeep's body.

Is any trimming required to the OEM fenders prior to Tubular Rocker Guard installation?
No. You do not have to trim your OEM fenders at all for clearance. Some other competing sliders require trimming up to 5/8" of an inch off your plastic fenders.

What finish is available?
RH4x4 Rocker Guards ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this Rocker Guard set made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!

SEARCH

SEARCH

Shop by Upgrade

Shop by Rig

Compatible Accessories

Installation Videos

ROCK SLIDERS / ROCKER GUARDS

2-DOOR

4-DOOR

JOIN OUR E-NEWSLETTER FOR THE LATEST UPDATES

ABOUT US

MY ACCOUNT

HELPFUL INFO

QUESTIONS? CONTACT US!